TN-5818-2GTXBP-MV-MV MOXA EN 50155 Managed Switches

Features and Benefits

• Layer 3 switching functionality to divide a large network into hierarchical subnets and allow data and information to communicate across networks
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• Leading EN50155-compliant L3 Ethernet switches for rolling stock applications
• DHCP Option 82 for IP address assignment with different policies
• EtherNet/IP* and Modbus/TCP industrial Ethernet protocol supported
• Turbo Ring, Turbo Chain, RSTP/STP, and MSTP* for network redundancy
• IGMP snooping and GMRP for filtering multicast traffic
• Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
• QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism
• IEEE 802.3ad, LACP for optimum bandwidth utilization
• SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
• SNMPv1/v2c/v3 for different levels of network management
• RMON for efficient network monitoring and proactive capability
• Bandwidth management prevents unpredictable network status
• Lock port allows access by only authorized MAC addresses
• Port mirroring for online debugging
• Automatic warning by exception through email, relay output
• Line-swap fast recovery
• Automatic recovery of connected device’s IP addresses
• LLDP for automatic topology discovery in network management software
• Configurable by web browser, Telnet/serial console, and CLI* Windows utility
• Panel mounting or DIN-Rail mounting installation capability

Introduction

The ToughNet TN-5816/5818 switches are high performance M12 Layer 3 Ethernet switches that support Layer 3 routing functionality to facilitate the deployment of applications across networks. TN-5816/5818 switches use M12 and other circular connectors to ensure tight, robust connections and guarantee reliable reslience against environmental disturbances, such as vibration and shock. TN-5816/5818 switches provide a wide power input range of 12/24/36/48 VDC, 72/96/110 VDC, or 110/220 VDC/VAC. Dual, isolated redundant power supply increases the reliability of your communications system and saves on cabling/wiring costs. TN-5816/5818 switches provide up to 16 Fast Ethernet M12 ports with 2 bypass relay ports, and an optional 2 Ethernet interface Gigabit ports with bypass relay functionality. Models with an extended operating temperature range of -40 to 75°C are also available. TN- 5816/5818 series Ethernet switches are compliant with EN50155/50121-4 requirements, making the switches suitable for a variety of industrial applications.

Technology

Standards:
     IEEE 802.3 for 10BaseT
     IEEE 802.3u for 100BaseT(X)
     IEEE 802.3ab for 1000BaseT(X)
     IEEE 802.3x for Flow Control
     IEEE 802.1D for Spanning Tree Protocol
     IEEE 802.1w for Rapid STP
     IEEE 802.1Q for VLAN Tagging
     IEEE 802.1p for Class of Service
     IEEE 802.1X for Authentication
     IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2C/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telent, SSH, Syslog, LLDP, IEEE 1588 PTP, NTP Server/Client
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE802.3x flow control, back pressure flow control
Layer 3 Switching: Static routing, RIP V1/V2, OSPF, VRRP for routing redundancy

Switch Properties

Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256

Interface

Fast Ethernet: Front cabling, M12 connector, 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Gigabit Ethernet: Down cabling, M12 connectors, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, auto MDI/MDI-X connection, with bypass relay function
Console Port: M12 A-coding 5-pin male connector
System LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL
Port LED Indicators: 10/100M (Fast Ethernet port), 10/100/1000M (Gigabit Ethernet port)
Alarm Contact: 2 relay outputs in one M12 A-coding 5-pin male connector with current carrying capacity of 3 A @ 30 VDC
Rotary Switches: For setting the last 3 digits of the IP address

Power Requirements

Input Voltage:
     LV: 12/24/36/48 VDC (8.4 to 60 VDC)
     MV: 72/96/110 VDC (50.4 to 154 VDC)
     HV: 110/220 VDC/VAC (88 to 300 VDC, 85 to 264 VAC)
Input Current:
     TN-5816BP Series:
          0.793 A @ 24 VDC, 0.302 A @ 72 VDC,
          0.203 A @ 110 VDC, 0.465 A @ 110 VAC
          0.286 A @ 220 VAC
     TN-5818 Series:
          1.016 A @ 24 VDC, 0.39 A @ 72 VDC,
          0.253 A @ 110 VDC, 0.569 A @ 110 VAC,
          0.338 A @ 220VAC
Overload Current Protection: Present
Connection: M23 connector
Reverse Polarity Protection: Present

Physical Characteristics

Housing: Metal, IP54 protection (optional protective caps available for unused ports)
Dimensions:
     TN-5816BP Series: 250 x 175.8 x 115 mm (9.84 x 6.92 x 4.53 in)
     TN-5818 Series: 250 x 181.4 x 115 mm (9.84 x 7.14 x 4.53 in)
Weight:
     TN-5816 Series: 2900 g
     TN-5818 Series: 3002 g
Installation: Panel mounting, DIN-Rail mounting (with optional kit: DK-DC50131)

Environmental Limits

Operating Temperature: Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m

Standards and Certifications

Safety: UL 508 (Pending)
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
     EN 61000-4-2 (ESD) Level 3
     EN 61000-4-3 (RS) exceeds Level 3
     EN 61000-4-4 (EFT) Level 3
     EN 61000-4-5 (Surge) Level 3
     EN 61000-4-6 (CS) Level 3
     EN 61000-4-8
     EN 61000-4-11
Rail Traffic (for panel mounting installations): EN 50155, EN 50121-4
Shock: IEC 61373
Freefall: IEC 60068-2-32
Vibration: IEC 61373

Warranty

Warranty Period: 5 years