IGS-6325-16T4S Planet Gigabit Managed Switches

 High-capacity Unit for Factory and Metropolitan Long-reach Networking

PLANET IGS-6325-16T4S is the smallest yet high-capacity, industrial-grade Layer 3 managed switch with high-density hybrid copper and fiber optic interfaces. It features 16 10/100/1000BASE-T RJ45 ports and 4  100/1000BASE-X SFP slots in a DIN-rail type rugged case and can operate stably under the temperature range from -40 to 75 degrees C. 
It is designed to be installed in any space-limited cabinets as it is small in size. Its connection distance can be flexibly extended via its powerful ports. 

Applications

High Availability Mesh Networking Solution for Big Data System

To improve the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the IGS-6325-16T4S offers up to 40Gbps data exchange speed via Optical Fiber interface and the transmission distance can be extended to 120km. 
The IGS-6325-16T4S features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) into customer’s automation network to enhance system reliability and uptime. The IGS-6325-16T4S is the ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm.

Layer 3 VLAN Routing 

With the built-in, robust Layer 3 routing protocols, the IGS-6325-16T4S ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 128 routing entries. The IGS-6325-16T4S, certainly an ideal solution for industries, offers greater security, control and bandwidth conservation, and high-speed uplink.

Features and Benefits

Physical Port

• 16 10/100/1000BASE-T RJ45 copper ports
• 4 100/1000BASE-X SFP slots for SFP type auto detection 
• One RJ45-to-RS232 console interface for basic management and setup

Industrial Hardened Design

• Dual power input, redundant power with reverse polarity protection
• - DC 9 to 48V input or AC 24V input
• - Active-active redundant power failure protection
• - Backup of catastrophic power failure on one supply
• - Fault tolerance and resilience
• DIN-rail and wall-mountable designs
• IP30 aluminum case 
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

Specifications

Hardware Specifications

Copper Ports: 16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP Ports: 4 100/1000BASE-X SFP slot interfaces (Port-17 to Port-20)
Compatible with 100BASE-FX SFP transceiver
SFP+ Ports: N/A
Console: 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Switch Architecture: Store-and-Forward
Switch Fabric: 40Gbps/non-blocking
Throughput: 29.76Mpps@64Bytes
Address Table: 16K entries, automatic source address learning and aging
Shared Data Buffer: 32Mbits
Jumbo Frame: 10K bytes
SDRAM: 512Mbytes
Flash Memory: 64Mbytes
Flow Control: IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Reset Button: < 5 sec: System reboot
> 5 sec: Factory default
Connector: Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm: One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
Digital Input (DI): 2 digital input:
　Level 0: -24~2.1V (±0.1V)
　Level 1: 2.1~24V (±0.1V)
　Input load to 24V DC, 10mA max.
Digital Output (DO): 2 digital output:
　Open collector to 24VDC, 100mA
Enclosure: IP30 aluminum case
Installation: DIN-rail or wall mounting
Dimensions (W x D x H): 76.8 x 107.3 x 152 mm
Weight: 1,168g
Power Requirements: DC 9~48V, 3.3A max.
AC 24V, 1.2A max.
Power Consumption: DC input:
Max. 9.12 watts/32BTU
(system on)
Max. 26.04 watts/89 BTU (Full loading)
 
AC 24V input:
Max. 12 watts/41BTU (system on)
Max. 29 watts/99 BTU (Full loading)
ESD Protection: 6KV DC
Surge Protection: 4KV DC
LED Indicators: System:
　Power 1 (Green), Power 2 (Green)
　Fault Alarm (Red)
　Ring (Green), Ring Owner (Green)
　DIDO (Red)
Per 10/100/1000T RJ45 Port:
　1000Mbps LNK/ACT (Green)
　10/100Mbps LNK/ACT (Amber)
Per SFP Port:
　1000Mbps LNK/ACT (Green)
　100Mbps LNK/ACT (Amber)

Layer 2 Management Functions

Port Configuration: Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port link capability control
Port Status: Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
Port Mirroring: TX/RX/Both
Many-to-1 monitor
VLAN: 802.1Q tagged VLAN
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
IP Subnet-based VLAN
MVR (Multicast VLAN registration)
GVRP
Up to 256 VLAN groups, out of 4095 VLAN IDs
Link Aggregation: IEEE 802.3ad LACP/static trunk
14 trunk groups with 16 port per trunk group
Spanning Tree Protocol: IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IGMP Snooping: IPv4 IGMP (v1/v2/v3) snooping
IPv4 IGMP querier mode support
Supports 255 IGMP groups
MLD Snooping: IPv6 MLD (v1/v2) snooping,
IPv6 MLD querier mode support
Supports 255 MLD groups
Access Control List: IP-based ACL/MAC-based ACL
ACL based on:
　- MAC Address
　- IP Address
　- Ethertype
　- Protocol Type
　- VLAN ID
　- DSCP
　- 802.1p Priority
Up to 256 entries
Bandwidth Control: Per port bandwidth control
Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
QoS: Traffic classification based, strict priority and WRR
8-level priority for switching:
　- Port number
　- 802.1p priority
　- 802.1Q VLAN tag
　- DSCP/ToS field in IP packet
Synchronization: IEEE 1588v2 PTP(Precision Time Protocol)
　- Peer-to-peer transparent clock
　- End-to-end transparent clock

Layer 3 Functions

IP Interfaces: Max. 128 VLAN interfaces
Routing Table: Max. 128 routing entries
Routing Protocols: IPv4 hardware static routing
IPv6 hardware static routing
OSPFv2 dynamic routing

Management

Basic Management Interfaces: Console; Telnet; Web browser; SNMP v1, v2c
Secure Management Interfaces: SSHv2, TLS v1.1/v1.2, SSL, SNMPv3
System Management: Firmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
Remote Syslog
System log
LLDP protocol
NTP
PLANET Smart Discovery Utility
SNMP MIBs: RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP

Standards Conformance

Regulatory Compliance: FCC Part 15 Class A
CE:
EN55032
EN55035
EN 62368-1/IEC 62368-1: 2014
Stability Testing: IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards Compliance: IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3ah OAM
IEEE 802.1ag Connectivity Fault Management (CFM)
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
RFC 2328 OSPF v2
ITU-T G.8032 ERPS Ring
ITU-T Y.1731 Performance Monitoring

Environment

Operating: -40 ~ 75 degrees C
Storage: -40 ~ 85 degrees C
Humidity: 5 ~ 95% (non-condensing)