EKI-5624PI-AE ADVANTECH DIN Rail POE Unmanaged Switches

 Features

• 4 x IEEE 802.3af/at-compliant fast Ethernet ports
• PoE standard + 2 x Gigabit Ethernet ports
• Communicates with SCADA software via Modbus/TCP
• Communicates with NMS via SNMP
• Port-based QoS for deterministic data transmission
• Wide operating temperature range of -40 ~ 60°C (EKI-5624PI)
• EMS Level 3 protection for extreme outdoor environments
• IEEE 802.3az Energy-Efficient Ethernet
• Jumbo frame support (up to 9,216 Bytes)
• Supports redundant 12 ~ 24 V (9 ~ 36 V) power input and P-Fail relay
• Loop detection

Introduction

The EKI-5624P and EKI-5624PI support PoE on Ports 1 ~ 4 and are classified as power source equipment. They are the world’s first convergence switches for process control and IT
networking management. This series use Modbus/TCP to communicate with SCADA software and SNMP to communicate with NMS simultaneously, thereby allowing full read control
over devices for either control engineers or for IT personnel. The switches come with port-based QoS for deterministic data transmission, enabling specific ports to prioritize traffic
and delay less important data over the remaining ports. The switches use the highest quality components and can operate at temperatures of -40 ~ 75°C while also possessing EMS
Level 3 protection against electromagnetic interference. The switches comply with E-mark for in-vehicle applications and surveillance systems.

Specifications

Communications

Standard: IEEE 802.3af/at, 802.3, 802.3u, 802.3ab, 802.3az,
802.3x, 802.1p
 
LAN: 10/100BASE-TX, 10/100/1000BASE-TX
Transmission Distance: Up to 100 m
Transmission Speed: Up to 1000 Mbps

Interface

Connectors: 4 x 10/100BASE-TX with PoE +
2 x 10/100/1000BASE-TX
6-pin removable screw terminal (power & relay)

LED Indicators

System LED: P1, P2, P-Fail, Loop, PoE
Port LED status: 10/100BASE-TX or 10/100/1000BASE-TX: LNK/ACT,
Speed, PoE port

Physical

Enclosure: Metal / Aluminum Shell with solid mounting kits
Protection Class: IP30
Installation: DIN-Rail and Wall-Mount
Dimensions (W x H x D): 74 x 152 x 105 mm (2.913 x 5.984 x 4.137) inch

Environment

Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature:  -40 ~ 85°C (-40 ~ 185°F)
Relative Humidity:  10 ~ 95% (non-condensing)

Switch Properties

MAC Address: 2K entries
Packet Buffer:  1 Mbit
Switching Capacity: 4.8 Gbps

Power

Power Consumption: 4.2w (System)
Power Input: 12-24 Vdc, (7A-3A)
Power Budget: 60w @ 24v
50w @ 12v

Certification

Safety: IEC/EN 60950, UL61010-2-201, e-Mark Comply with *Class 1 Division 2, * IECEx, *ATEX
EMC: CE, FCC, e-Mark
EMI: EN 55011/ 55022 Class A, EN 61000-6-4, FCC Part 15 Subpart B Class A
EMS: 
EN 55024/ EN 61000-6-2
EN 61000-4-2 (ESD) Level 3
EN 61000-4-3 (RS) Level 3;
EN 61000-4-4 (EFT) Level 3
EN 61000-4-5 (Surge) Level 3;
EN 61000-4-6 (CS) Level 3
EN 61000-4-8 (Magnetic Field) Level 3
 
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6