PTC-101-S-LC-LV
Industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with LC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature
Prodotti Correlati
Certificati
Features and Benefits
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
- Link Fault Pass-Through (LFP)
- Power failure alarm by relay output (LV model only)
- -40 to 85°C operating temperature range
- Redundant dual DC power inputs (LV model only)
- Integrated high-reliability power supply eliminates the need for external power transformer
- Compliant with EN 50121-4 and essential sections of EN 50155
Introduction
The PTC-101 Ethernet-to-fiber media converters convert from 10/100BaseT(X) to 100BaseFX. Models are available with either SC, ST, or LC connectors. The PTC-101 converters eliminate the need for additional wiring, and support IEEE 802.3 and IEEE 802.3u/x protocols with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing to provide a total solution for your industrial Ethernet networks. The PTC-101 is compliant with the essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD and vibration.
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
Interface
RJ45/M12 Ports: 10/100BaseT(X)
Fiber Ports: 100BaseFX (SC/ST/LC connectors)
LED Indicators: PWR1, PWR2, Fiber Link, 10/100M (TP port)
DIP Switches:
DIP No: 1
Function: Auto Negotiation
ON: Enable
OFF: Disable
DIP No: 2
Function: Force TP Speed
ON: 100 Mbps
OFF: 10 Mbps
DIP No: 3
Function: Force TP Duplex
ON: Full Duplex
OFF: Half Duplex
DIP No: 4
Function: Link Fault Pass Throuth
ON: Enable
OFF: Disable
DIP No: 5
Function: Operating Mode
ON: Store-and-Forward
OFF: Pass Through
Alarm Contact: One relay output with current carrying capacity of 1 A @ 24 VDC (LV model only)
Optical Fiber
Table:
100BaseFX:
Multi-mode:
Wavelength: 1300 nm
Max. TX: -14 dBm
Min. TX: -20 dBm
RX Sensitivity: -32 dBm
Link Budget: 12 dB
Typical Distance:
5 km
4 km
Saturation: -6 dBm
Single-mode:
Wavelength: 1310 nm
Max. TX: 0 dBm
Min. TX: -5 dBm
RX Sensitivity: -34 dBm
Link Budget: 29 dB
Typical Distance: 40 km
Saturation: -3 dBm
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 152.15 x 123.46 x 66.65 mm (5.99 x 4.86 x 2.62 in)
Weight:
Product only: 690 g
Packaged: 875 g
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Conformal Coating: Available upon request
Power Requirements
Input Voltage:
LV-DC:
Power Supply Type: 20 to 72 VDC
Power Consumption: 170 mA @ 20 VDC
Fuse Rating: 3.15 A (T) 2
HV-AC:
Power Supply Type: 85 to 264 VDC
Power Consumption: 73 mA @ 85 VDC
Fuse Rating: 3.15 A (T) 2
HV-DC:
Power Supply Type: 88 to 300 VDC
Power Consumption: 47 mA @ 88 VDC
Fuse Rating: 3.15 A (T) 2
Note:
LV-DC compliant with EN 50155 on 48VDC
HV-DC compliant with EN 50155 on 110VDC
Connection: Removable terminal block
Overload Current Protection: 1.6 A (protects against two signals shorted together)
Reverse Polarity Protection: Protects against V+/V- reversal
Standards and Certifications
Safety: UL 60950-1
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 5,
EN 61000-4-11
Power Automation: IEC 61850-3, IEEE 1613
Rail Traffic: EN 50155 (essential compliance), EN 50121-4
Freefall: IEC 60068-2-32
Vibration: IEC-61850-3, IEC-60870-2-2, EN 50125-3 (M12 models only)
Green Product: RoHS, CRoHS, WEEE
MTBF (mean time between failures)
Time: 1,211,613 hrs
Database: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years