PCIE-1805-AE
1MS/s, 16-bit, 32-ch Analog Input PCIE Card
Features
- 32-ch single-ended or 16-ch differential or a combination of analog input
- 16-bit A/D converter, with up to 1MHz sampling rate
- Auto calibration
- Current measurement (0-20mA or 4-20mA)
- Support digital and analog triggers
- Multi-card synchronization
Introduction
PCIE-1805 is a high-resolution, high-channel-count analog input PCIE card. It provides 32 channels of multiplexed voltage/current measurement, up to 1 MS/s sample rate, 16-bit
resolution analog input with low distortion and noise performance. The card features a variety of input ranges and covers both voltage and current measurement. It can easily be
applied to most of the industrial applications.
Specifications
Analog Input
Channels: 32 single-ended, 16 differential, or combination
Resolution: 16 bits
Max. Sampling Rate: 1MS/s, shared by all enabled channels
Overvoltage Protection: 30 Vp-p
Input Impedance:
AI+ to AGND (Single Ended): >1000 GΩ in parallel with 9 pF
AI+ to AI- (Differential): >1000 GΩ in parallel with 6 pF
Sampling Modes: Software and onboard programmable pacer
Input Range: ±10 V/±5 V/±2 V/±1 V/0 ~ 20 mA/4 ~ 20 mA
Offset error:
< ±0.5 mV (Voltage Mode);
< ±2.5 μA (Current Mode)
Gain error:
< ±0.01 % (Voltage Mode);
< ±0.05 % (Current Mode)
RMS Noise: 0.1mV
Auto calibration: Yes
Multi-card synchronization: Yes
Trigger & Clock Input
Trigger mode: Start, delay to start, stop, delay to stop
Trigger source: 2 external digital triggers and 2 analog triggers from AI channels
Clock input: 2 digital trigger inputs, and 1 conversion clock input
Trigger Input voltage:
Logic 0: 0.8 V max. (0 V min.)
Logic 1: 2.0 V min. (5 V max.)
Trigger and Clock Output
Channels: 2 multi-function outputs
Output capability:
Logic 0: 0.8 V max. @ 10 mA
Logic 1: 2.0 V min. @ -10 mA
General
Bus Type: PCI Express x1
I/O Connector: 1 x DB62 female connector
Dimensions (L x H): 168 x 98 mm (6.6" x 3.9")
Power Consumption:
+3.3 V 300 mA typ./320mA max.
+12 V 70mA typ. / 90mA max.
Operating Temperature: 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature: -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity: 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)