NE-4120S-P
10/100M Ethernet Network Enabler for RS-232 device, pin header, with programmable firmware
Bisogno di aiuto?
Certificati
Features and Benefits
- 10/100 Mbps Ethernet interface
- Up to 230.4 kbps baudrate support
- Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
- DHCP, BootP, Static IP, and ARP supported
- SNMP and e-mail alerts for event trapping and notification
- Half the size of a credit card—only 57 × 40 mm
- Low power consumption at 1.5W, with single +5V input
Introduction
Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.
SNMP and E-mail Alerts for Event Trap and Notification
NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions:
- Cold/warm start
- Password authentication failure
- Change in DSR/DCD line signal
- Change in IP address
- Change in password
Form Factor
Type: Ready-to-go pin header modules
Dimensions: 57 × 40 mm (2.24 x 1.57 in)
Weight: 20 g
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Magnetic Isolation Protection: 1.5 kV built-in
Connector: 5-pin pin header
Serial Interface
Number of Ports: 2
Serial Standards:
Port 1:RS-422, RS-485-4w, RS-485-2w
Port 2:TTL console port
RS-485 Data Direction Control: ADDC® (automatic data direction control)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate: 110 bps to 230.4 kbps
Serial Signals
TTL:
Port 1: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Port 2: TxD, RxD, GND
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Digital I/O Pins
GPIO: 4 programmable I/O pins
Software
Network Protocols: ICMP, ARP, IPv4, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP
Configuration Options: Web Console, Serial Console, Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.x
Operation Modes: Real COM, TCP Server, TCP Client, UDP
Environmental Limits
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 60°C (-40 to 140°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m
Power Requirements
Input Voltage: 5 VDC (±5%)
Power Consumption: 290 mA @ 5 VDC max.
Standards and Certifications
EMC: CE, FCC
EMI: EN 55022 Class B, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-8,
EN 61000-4-11
Green Product: RoHS, CRoHS, WEEE
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures): 289,573 hrs
Warranty
Warranty Period: 5 years