GW1101-1D(RS485) 3ONEDATA Gateways

GW1101 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 2 types of products and support 1 RS-232 or RS-485/422 and 1 100M Ethernet copper port. They adopt wall mounting to meet the requirements of different application scenes. Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.

 

Support 10/100Base-T(X) self-adaptive Ethernet interface

Support 300bps-115200bps line speed and non-blocking communication

Support RTS/CTS, DTR/DSR and XON/XOFF flow control

Support response timeout setting of characters

Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes

Support up to 32 TCP Slave requests under Master mode

Support up to 16 TCP Master connections under Slave mode

Support virtual and real ID mapping to achieve flexible access between Master and Slave devices

Support IP address and MAC address filtering, which is easy to achieve accurate access control

Support classification of user management to achieve humanized permission management

Support monitoring for serial port status and parameters, so the communication status will be clear at a glance

Support Windows configuration tool, TELNET, WEB configuration forms and access control

File management is convenient for the device rapid configuration and online upgrading

 

Standard: 10Base-T, 100Base-TX

Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET,

SNMP, ICMP, DHCP, DNS

Rate: 10/100M automatic flow control, MDI/MDI-X autotunning

Interface quantity: 1

Interface form: RJ45

 

Duplex mode: full/half duplex mode self-adaption

Standard: RS-485, RS-422

Protocol: Modbus RTU/ASCII

Quantity of serial port: 1 RS-485/422 serial port

RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, RBaud rate: 300-115200bps

Data bit: 5bit, 6bit, 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form: RS-485/422, adopt 5 pins 5.08mm pitch terminal blocks

Flow control: RTS/CTS, DTR/DSR, XON/XOFF

Pull high/low resistor for RS-485: 4.7 kΩ

Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave

Connection quantity: up to 32 TCP Slave requests are supported under Master mode up to 16 TCP Master connections are supported under Slave mode

 

WEB configuration management, TELNET configuration, Windows configuration tool

 

Classification of User Permissions, IP address filtering, MAC address filtering, WEB Console, TELNET Console

 

Power supply indicator, Ethernet port indicator, serial port indicator

 

9~48VDC, 2 pins 5.08mm pitch terminal blocks

 

No-load (@24VDC)

GW1101-1D(RS-485): 0.86W

 

Full-load (@24VDC)

GW1101-1D(RS-485): 1.15W

 

Operating temperature range: -40~75℃

Storage temperature range: -40~85℃

Relative humidity: 5%～95%（no condensation）

 

Housing: IP40 protection, metal

Installation: wall mounting

Dimension (W x H x D): 69mm×22mm×100mm

Weight: 230g

 

IEC 61000-4-2 (ESD, Electro-static Discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

 

CE, FCC, RoHS

 

3 years