VPort 56-2MP-CAM10X
Full HD zoom IP camera, RJ45, 24VAC/VDC/PoE, 0 to 60?C
Features and Benefits
- -40 to 75°C operating temperature (fan not required)
- 1/2.5” progressive scan CMOS camera with maximum full HD (1920 x 1080) resolution
- 10x optical zoom and 16x digital zoom; up to 160x zoom ratio
- High quality video image with 3DNR, BLC, and Image Stabilizer
- Maximum 3 independent video streams, 2 x H.264 and 1 x MJPEG
- Optional model with built-in single mode fiber
- Two-way and full duplex audio input/output
- DynaStream™ and CBR Pro™ supported for maximum network efficiency
- SD card interface for disconnection and event recording
Introduction
The VPort 56-2MP is the world’s first rugged Full HD IP zoom camera designed for mission critical applications. The camera can operate in temperatures ranging from -40 to 75°C (T models), without a built-in or external fan. The full HD resolution (1920 x 1080) H.264 IP zoom cameras come with an advanced optical technology featuring 10x optical and 16x digital zoom to improve the efficiency of your surveillance system and ensure the best video quality. With 3D DNR built in, the VPort 56-2MP provides an extra clear image quality, even when operating in extreme environments. The VPort 56-2MP-S-SC’s fiber Ethernet port can extend network distances up to 140 km (87 miles), providing a viable solution for long distance IP surveillance applications.
Camera
Sensor: 1/2.5” HD progressive scan CMOS
Lens: 6.3 to 63 mm auto focus zoom lens
Illumination:
Color: 0.2 lux at F1.8
B/W: 0.05 lux at F1.8
Synchronization: Internal
White Balance: ATW, AWB
Electronic Shutter
AES: On/Off
Fix: 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec
S/N Ratio: More than 50 dB (AGC off)
ICR Control: Auto (light sensor control) or DI control
DNR: Built-in 3D DNR
AGC Control: On/Off
Backlight Compensation: On/Off
Auto Exposure: On/Off
Image Rotation: Flip, Mirror, and 180° rotation
Auto Sense Up: On/Off, Max. 64x
Image Setting: Manually tune sharpness
Video
Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG
Video Output: via Ethernet
Video Streams: Up to 3 video streams (2 x H.264 and 1 x MJPEG)
Stream 1: H.264, 1920 x 1080 resolution (max.)
Stream 2: H.264, 1280 x 720 resolution (max.)
Stream 3: MJPEG, full D1 resolution (max.)
Video Resolution and FPS (frames per second): Up to 30/25 FPS for each of 3 independent streams at max resolution.
Video Viewing:
DynaStream™ supported for automatic adjustment of frame rate
Image stabilizer to reduce video shaking
CBR Pro™ for optimized image quality within limited bandwidth
8 privacy mask areas provided
Adjustable image size and quality
Audio
Audio Inputs: 1 Line-in with 3.5 mm phone jack
Audio Outputs: 1 Line-out with 3.5 mm phone jack
Two-Way Audio: Full duplex two-way audio
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X, SSL
Ethernet: 1 10/100BaseT(X) Ethernet port, RJ45 connector, or 1 100BaseFX, single mode
Serial Interface
RS-485: 1 full-duplex RS-485
GPIO
Digital Inputs: 1, max. 8 mA
High: +13 to +30 V
Low: -30 to +3 V
Relay Output: 1, max. 24 VDC @ 1 A
LED Indicators
STAT: Indicates if the system is booted properly or not
Network: 10 Mbps or 100 Mbps
Power: Power on/off
Local Storage
SD Socket: Standard SD socket (SDHC, SDXC)
Power Requirements
Input:
12/24 VDC, 24 VAC or Power-over-Ethernet (PoE+, 802.3at), redundant power design
Power Consumption:23 W
Physical Characteristics
Camera Body Housing: Metal, IP30 protection
Weight: 1415 g
Installation: Wall mounting, ceiling mounting, pole mounting, corner mounting (optional external housing and mounting accessory may be required)
Alarms
Video Motion Detection: 3 independently configurable motion areas
Camera Tamper: Sensitivity adjustable camera tamper detection (Pending)
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Custom Alarms: HTTP event and CGI events for setting customized alarm actions
Email/FTP Messaging: Automatic transfer of stored images via email or FTP as event-triggered actions
Pre-alarm Buffer: 84 MB video buffer for JPEG snapshot images
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-31 to 167°F)
Storage Temperature: -40 to 85°C (-31 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL60950-1, EN 50121-4, NEMA TS2
EMI: FCC Part 15, CISPR (EN 55022) class A
EMS:
EN 61000-4-2 (ESD), Level 3,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF (mean time between failures)
Time: 169,886 hours
Database: Telcordia (Bellcore), GB 25°C
Warranty
Warranty Period: 3 years
Software Development Kit
VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (latest version available on Moxa website).
Standard: ONVIF ProfileS