VPort 354 MOXA industrial video servers

VPort 354 MOXA

VPort 354

Full Motion, 4-ch MPEG4/MJPEG Industrial Video Encoder, 2 10/100BaseT(X) Ethernet port, 0 to 60°C

Prezzo per pezzo

€ 800,28

(IVA esclusa)

€ 976,34 (IVA inclusa)

Articoli Prezzo (IVA esc.)
1+ pz.€ 800,28
3+ pz. € 784,272
5+ pz. € 768,274

Prezzo di 1 pz. iva (22%) inclusa: € 976,34

Disponibilità: Non Disponibile

Brand: MOXA

SKU: 79545

Model: VPort 354

Bisogno di aiuto?


Features and Benefits

  • Industrial design with -30 to 70°C operating temperature and fiber optic Ethernet port
  • 2 Ethernet ports for cascade and port redundancy
  • SD card slot for local storage capability
  • Modbus/TCP supported for easy communication with SCADA software
  • Video stream up to 120 frames/sec at 4CIF (704 x 480) resolution
  • Free VPort SDK PLUS supported
  • -30 to 70°C wide operating temperature
  • Built-in single-mode or multi-mode fiber optic Ethernet port—media converter not required
  • 2 Ethernet ports for cascade and port redundancy
  • 1 RS-232/422/485 COM port for controlling external serial devices over Ethernet (Pending)
  • Redundant 12/24 VDC and 24 VAC power inputs for greater reliability
  • Metal housing with IP30 protection against dust
  • DIN-Rail mounting installation for industrial environments
  • UL508 certification (Pending)
  • Meets NEMA TS2, Section 2 requirements (Pending)
  • Modbus/TCP for easy communication with SCADA software
  • Standard RTSP (real-time streaming protocol) video streaming for easy integration
  • Multicast (IGMP) protocols for efficient network transmission
  • SNMPv1/v2c/v3 MIB-II for easy network management
  • QoS (ToS) for configuring the transmission priority of video streams
  • UPnP, DDNS, and IP filtering supported

Introduction

The VPort 354 is a high performance, 4-channel industrial video encoder that provides up to 4CIF full frame rate performance (NTSC: 704 x 480 @ 30 FPS; PAL: 704 x 576 @ 25 FPS) for each channel, and supports a dual MJPEG/MPEG4 algorithm, making it especially well- suited for use with distributed surveillance systems in critical industrial applications. In addition to the rugged-design features, the Modbus/TCP and serial-to-Ethernet connectivity make the VPort 354 more suitable for industrial applications. The two built-in Ethernet ports can be cascaded as a daisy-chain or used for port redundancy, making network communication more safe and reliable. To prevent video loss when the network is down, the VPort 354 can automatically record video on an SD card, and once the network is back up, the recorded video can be downloaded via FTP access.

Video

Video Compression: MJPEG or MPEG4 (ISO/IEC 14496-2)
Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohm)
Video Outputs: Via Ethernet port
Video Streams: Dual streams (one for MJPEG, the other for MPEG4) at the same video resolution (note that MJPEG only has one quality setting)
NTSC/PAL: Manual
Video resolution and FPS (frame per second):
     CIF:
          NTSC:
               Size: 352x240
               Max. FPS: 30

          PAL:
               Size: 352x288
               Max. FPS: 25

     QCIF:
          NTSC:
               Size: 176x112
               Max. FPS: 30

          PAL:
               Size: 176x144
               Max. FPS: 25

      2CIF:
           NTSC:
                Size: 352x240
                Max. FPS: 30

           PAL:
                Size: 704x288
                Max. FPS: 25

     4CIF:
          NTSC:
               Size: 704x480
               Max. FPS: 30

          PAL:
               Size: 704x576
               Max. FPS: 25
Video Viewing:
     Adjustable image size and quality
     Timestamp and text overlay

Audio

Audio Inputs: 1 Line-in or MIC-in with RCA connector
Audio Outputs: 1 Line-out with RCA connector
Audio Format: Mono, PCM

Network

Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP
Ethernet: 2 10/100BaseT(X) auto negotiating RJ45 ports, or 2 100BaseFX fiber ports (single/multi-mode, SC connector)

Serial Port

PTZ Ports: 1, RS-232/422/485 port (terminal block connector), max. speed of 115.2 Kbps
COM Ports: 1, RS-232/422/485 (DB9 female connector), max. speed of 115.2 Kbps
Console Port: 1 RS-232 RJ45 port

GPIO

Digital Inputs: 4, max. 8 mA
Low: +13 V to +30 V; High: -30 V to +3 V
Relay Outputs: 2, max. 24 VDC @ 1 A

LED Indicators

PWR1: Power 1
PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
V1, V2, V3, V4: Video input signal activity

Local Storage

SD Socket: Standard SD socket, SDHC, with SD LED indicator

Power Requirements

Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancy
Power Consumption: Approx. 12 W

Physical Characteristics

Housing: Metal, IP30 protection
Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight: 1200 g (2.64 oz)
Installation: DIN-Rail mounting, wall mounting (with optional kit)

Alarms

Video Motion Detection: Includes sensitivity tuning
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email or FTP with event-triggered actions
Custom Alarms: HTTP event servers and CGI events for setting customized alarm actions

PAN/TILT/ZOOM

PTZ Camera Control: Via RS-232/422/485 PTZ port or COM port
PTZ Control Function: PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 10 custom commands
PTZ Function Updates: Driver upload supported
Supported Device Protocols: Pelco D, Pelco P, Dynacolor DynaDome, Cohu, Custom Camera
Transparent PTZ Control: Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder

Security

Password: User level password protection
Filtering: By IP address

Environmental Limits

Operating Temperature:   
     Standard Models: 0 to 60°C (32 to 140°F)
     Wide Temp. Models: -30 to 70°C (-22 to 158°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
     Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
     EN 61000-4-2 (ESD) Level 3,
     EN 61000-4-3 (RS) Level 3,
     EN 61000-4-4 (EFT) Level 3,
     EN 61000-4-5 (Surge) Level 3,
     EN 61000-4-6 (CS) Level 2,
     EN 61000-4-8,
     EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6.

MTBF (mean time between failures)

Time: 271,000 hrs
Database: Telcordia (Bellcore), GB 25°C

Warranty

Warranty Period: 5 years

Software Development Kit

VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website).

Disclaimer

Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

I Nostri Marchi

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Patlite
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Advantech
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter

Contattaci via email: clicca qui

Visita anche il nostro portale icpdas.store

© 2020. Lastella Trade

site by www.davidesantandrea.it & Lastella Trade