UC-8410-LX
RISC-based Ready-to-Run Embedded Computer with IXP435, 8 Serial Ports, 3 LAN, DIO, CompactFlash, USB, Linux 2.6
Features and Benefits
- Intel XScale IXP435 533 MHz processor
- 256 MB DDR2 SDRAM and 16 MB Flash ROM onboard
- Onboard 16 MB NOR Flash to store OS, 32 MB NAND Flash for data storage
- 256 KB battery backup SRAM
- 8 RS-232/422/485 serial ports
- 4 digital input and 4 digital output channels
- 3 10/100 Mbps Ethernet ports
- 2 USB 2.0 hosts for mass storage devices
- CompactFlash socket for storage expansion
- Ready-to-run Linux platform
- DIN-Rail or wall mounting installation
- Robust, fanless design
- Wide temperature model available
Introduction
The UC-8410 embedded computers come with 8 RS-232/422/485 serial ports, 3 Ethernet ports, 4 digital input channels, 4 digital output channels, a CompactFlash socket, and 2 USB 2.0 hosts. The UC-8410 computers use the Intel XScale IXP435 533 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but does not generate a lot of heat. The built-in 16 MB NOR Flash ROM and 256 MB SDRAM give you enough memory to run your application software directly on the UC-8410, and the 32 MB NAND Flash can be used for data storage. Moreover, the 256 KB SRAM offers better data retention mechanism to avoid data loss. The UC-8410 computers support RS-232/422/485 serial ports, digital I/O channels, and has 3 LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. The UC-8410 computers come with the Linux 2.6 platform preinstalled to provide an open standard operating system for software program development. Software written for a desktop PC can be easity ported to the UC-8410 without modifying the code—all that's needed is a common compiler. This makes the UC-8410 an optimal solution for minimizing the cost and effort required for industrial applications. In addition to the standard model, a wide temperature (-40 to 75°C) model of the UC-8410 is also available for use in harsh industrial environments.
Computer
CPU: Intel XScale IXP435, 533 MHz
OS (pre-installed): Linux
DRAM: 256 MB DDR2 SDRAM onboard (512 MB max.)
SRAM: 256 KB, battery backup
Flash:
16 MB NOR Flash onboard to store OS (supports up to 32 MB)
32 MB NAND Flash onboard to store data
Expansion Bus: PCI/104 onboard
USB: USB 2.0 compliant hosts x 2, type A connector
Storage
Storage Expansion: CompactFlash socket
Ethernet Interface
LAN: 3 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection: 1.5 kV built-in
Serial Interface
Serial Standards: 8 RS-232/422/485 ports, software-selectable (8-pin RJ45)
Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates; see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 4, source type
Input Voltage: 0 to 30 VDC
Digital Input Levels for Dry Contacts:
Logic level 0: Close to GND
Logic level 1: Open
Digital Input Levels for Wet Contacts:
Logic level 0: +3V max.
Logic level 1: +10V to +30V (COM to DI)
Connector Type: 10-pin screw terminal block (4 points, COM, GND)
Isolation: 3 kV optical isolation
Digital Output
Output Channels: 4, sink type
Output Current: Max. 200 mA per channel
On-state Voltage: 24 VDC nominal, open collector to 30 V
Connector Type: 10-pin screw terminal block (4 points, GND)
Isolation: 3 kV optical isolation
LEDs
System: Power, Ready, Storage, Battery for SRAM
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 8, RxD x 8
Reset Button: Supports “Reset to Factory Default”
Physical Characteristics
Housing: SECC sheet metal (1 mm)
Weight: 850 g
Dimensions: 200 x 37 x 120 mm (7.87 x 1.46 x 4.72 in)
Mounting: DIN-Rail, wall
Environmental Limits
Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature:
Standard Models: -20 to 75°C (-4 to 167°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-vibration: 2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage: 12 to 48 VDC (3-pin terminal block)
Power Consumption:
15 W
310 mA @ 48 VDC
625 mA @ 24 VDC
1350 mA @ 12 VDC
Standards and Certifications
Safety: UL 60950-1, EN 60950-1, CCC (GB9254, GB17625.1)
EMC: EN 55022 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class B
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures): 171,369 hrs
Warranty
Warranty Period: 5 years
Linux
OS: Linux 3.8.13
File System: JFFS2, NFS, Ext2, Ext3
Internet Protocol Suite: TCP, UDP, IPv4, IPv6, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security: OpenVPN, iptables firewall
Web Server (Apache): Allows you to create and manage web sites; supports PHP and XML
Terminal Server (SSH): Provides secure encrypted communications between two un-trusted hosts over an insecure network
Dial-up Networking: PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with ‘chat’, ‘dip’, and ‘diald’, among (many) others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell).
Watchdog: Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)
Application Development Software:
Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
GNU C/C++ cross-compiler
GNU C library
GDB source-level debugging server
Software Protection: Encryption tool for user executable files (based on patented Moxa technology)
Windows Embedded CE 6.0
OS: Windows Embedded CE 6.0
File System: FAT
Internet Protocol Suite: TCP, UDP, IPv4, IPv6, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP
Web Server (WinCE IIS): Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions
Dial-up Networking: Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting
Watchdog: Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided)
Application Development Software:
Moxa WinCE 6.0 SDK
Moxa API Library
C Libraries and Run-times
Component Services (COM and DCOM)
Microsoft® .NET Compact Framework 3.5
XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2
SOAP Toolkit Client
Winsock 2.2