NPort Z3150-T
1-port ZigBee to Ethernet gateway, -40 to 75°C operating temperature
Prodotti Correlati
Features and Benefits
- IEEE 802.15.4/ZigBee compliant
- Network topologies: Mesh/Star/Cluster tree
- 128-bit AES hardware encryption
- Enhanced surge protection for serial and power
- Dual DC power inputs (NPort Z3150 only)
- Easy-to-use configuration utility
- Up to 99 nodes per network
Introduction
The NPort Z2150 and NPort Z3150 are IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence. The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can be connected to the NPort Z2150 and exchange data via PAN. An user-friendly utility is provided to configure the device type and network settings in simple steps. The NPort Z3150 was designed specifically to perform as a ZigBee Coordinator (ZC), providing nodes with an Ethernet interface to the ZigBee PAN. Internet connection ad network services are also provided via the ZigBee PAN. Remote users can monitor any ZigBee device in the PAN through the NPort Z3150. The following figure shows a typical topology of a ZigBee network. The NPort Z3150 is the ZigBee coordinator (ZC) connected to numerous ZigBee routers (ZR) and the routers are connected to end devices(ZED). Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort Z2150/Z3150’s serial and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This surge protection provides a robust solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.
ZigBee Interface
RF Standard: 802.15.4/ZigBee compliant
Frequency Band: 2.4 GHz
RF Data Rate: 250 kbps
Rx sensitivity: -96 dBm
Tx Power: 4.5 dBm (Max)
Transmission Distance: Up tp 100m (open space)
Antenna: 2dBi
RF Channel: 16 channels
Device Type: Coordinator, Router , End Device
Network Topology: Star, Mesh, Cluster tree
Security: 128-bit AES encryption algorithms
Serial Interface
Number of Ports: 1
Serial Standards: RS-232/422/485
Connector: DB9 male
Serial Line Protection: 1kV surge protection, 15kV ESD protection for all signals
RS- 485 Data Direction Control: ADDC (Automatic Data Direction Control)
Serial Communication Parameters
Data Bits: 8
Stop Bits: 1, 2
Parity: None, Even, Odd
Flow Control: RTS/CTS
Baudrate: 50 bps to 230.4 kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Software
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Configuration: ZigBee Configuration Utility
Firmware Upgrade: ZigBee Configuration Utility
Hardware
DIP Switch: Console/Operation Mode
SW1: Pull high/low resister, Termination for RS-422/485.
Reset Button: Reset to default
Physical Characteristics
Housing: Aluminum
Weight: 340g
Dimensions: Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH
Altitude: Up to 2000 m
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption: 45mA@12V
Connector: Power Jack with Screw,
Standards and Certifications
Safety: UL (UL60950-1), LVD (EN60950-1)
EMC: CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (meantime between failures): Over 20 years
Warranty
Warranty Period: 5 years