MGate EIP3170-T-IEX MOXA Modbus Gateways

MGate EIP3170-T-IEX MOXA

MGate EIP3170-T-IEX

1-port DF1 to EtherNet/IP gateway, -40 to 75°C operating temperature, IECEx certified.

Prezzo per pezzo

€ 443,00

(IVA esclusa)

€ 540,46 (IVA inclusa)

Articoli Prezzo (IVA esc.)
1+ pz.€ 443,00
3+ pz. € 425,284
5+ pz. € 411,997

Prezzo di 1 pz. iva (22%) inclusa: € 540,46

Disponibilità: Non Disponibile

Brand: MOXA

SKU: 93329

Model: MGate EIP3170-T-IEX

Bisogno di aiuto?


Prodotti Correlati

MOXA

DR-4524

Prezzo:  € 52,92   

Features and Benefits

  • PCCC objects for Rockwell Automation networks supported
  • Use ProCOM to implement control via COM port mapping
  • 8 simultaneous EtherNet/IP client/server pairs with up to 16 queued requests
  • Serial redirector keeps the original serial master and slave connection while connecting devices to the Ethernet
  • EtherNet/IP and DF1 protocol analyzer for easy troubleshooting
  • Redundant dual DC power inputs
  • Built-in Ethernet cascading for easy wiring
  • -40 to 75°C wide operating temperature models available

Introduction

MGate™ EIP3000 gateways provide EtherNet/IP to DF1 protocol conversion for users who need to connect Allen Bradley PLCs to an EtherNet/IP network. With a number of innovative functions, the MGate™ series overcomes the difficulties of connecting between legacy serial devices and SCADA software. Both 1 and 2-port gateways are available for use with different sized control networks. By supporting PCCC objects on CIP, the MGate™ EIP3000 can communicate seamlessly with SCADA software such as RSLinx. For users who develop control software based on EtherNet/IP, MGate EIP3000 offers the standard interface for connection. MGate™ EIP3000 gateways support up to 16 EtherNet/IP clients and servers simultaneously. Each client can send up to 16 requests at a time, and the multiple connection capability can help establish redundancy for more complex control systems. Moxa provides a user-friendly Windows utility with multi-language support. The utility supports a traffic monitoring function for EtherNet/IP and DF1 protocols, and not only logs events initiated by the gateway, but also records all commands and responses that pass through the gateway. The utility helps users determine the root cause of failures and performance bottlenecks. The serial redirector function allows the commands of a serial master (command initiator) to be redirected to the serial slave (command executor) on another port. In addition, a serial master can operate simultaneously with EtherNet/IP masters without changing the DF1 architecture or software. With the serial redirector function, MGate™ EIP3000 gateways can establish redundant control of legacy slave devices that were originally designed to be controlled by a single serial master. Each MGate™ EIP3000 gateway supports virtual serial ports for the remote PC. You can connect to the MGate™ EIP3000 through the COM port by using Moxa’s Real COM driver, with the actual physical connection over the Ethernet. The gateway supports up to 4 virtual COM port connections and offers greater flexibility when designing redundant control systems. When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, the EIP3000 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values. Complex device networks that incorporate high amperage devices could be subject to electrical signal distortion from electrical discharges, magnetic noise, or common mode transients. MGate™ series products solve this problem by using built-in optical isolation.

Ethernet Interface

Protocol: CIP (PCCC) on EtherNet/IP
Number of Ports:
     EIP3170/3170I: 2 (1 IP, Ethernet cascade)
     EIP3270/3270I: 2 (2 IPs)
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)

Serial Interface

Protocol: DF1 Full-duplex
Number of Ports:
     EIP3170/3170I: 1
     EIP3270/3270I: 2
Serial Standards: RS-232/422, software selectable
Connectors:
     EIP3170/3170I: DB9 male for RS-232, terminal block for RS-422
     EIP3270/3270I: DB9 male x 2
ESD Protection: 15 kV for all signals

Serial Communication Parameters

Data Bits: 8
Stop Bits: 1, 2
Parity: None, Even, Odd
Flow Control: RTS/CTS, DTR/DSR (RS-232 only)
Baudrate: 1200 bps to 921.6 kbps

Serial Signals

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND

Software

Utility: MGate Manager for Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
Configuration Options: Serial Console, Telnet Console, Windows Utility
Support: Smart Routing, Serial Redirection, ProCOM, MXview, SNMP v1 (read only)

Physical Characteristics

Housing: Plastic
Weight:
     MGate EIP3170: 360 g
     MGate EIP3270: 380 g
Dimensions:
     Without ears: 29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67 in)
     With ears extended: 29 x 89.2 x 124.5 mm (1.14 x 3.51 x 4.90 in)

Environmental Limits

Operating Temperature:
     Standard Models: 0 to 60°C (32 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand

Power Requirements

Input Voltage: 12 to 48 VDC
Power Connector: Terminal block
Power Consumption:
     MGate M3170: 435 mA (max.)
     MGate M3170I: 555 mA (max.)
     MGate M3270: 435 mA (max.)
     MGate M3270I: 510 mA (max.)

Standards and Certifications

Safety: UL 508, EN 60950-1
Hazardous Location:
     UL/cUL Class 1 Division 2 Groups A/B/C/D,
     ATEX Zone 2 Ex nA IIC T3 Gc, IECEx (-IEX model only)
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
     EN 55024,
     EN 61000-4-2 (ESD) Level 3,
     EN 61000-4-3 (RS) Level 3,
     EN 61000-4-4 (EFT) Level 4,
     EN 61000-4-5 (Surge) Level 3,
     EN 61000-4-6 (CS) Level 3,
     EN 61000-4-8 (PFMF) Level 1,
     EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6

Reliability

MTBF (mean time between failures):
     MGate EIP3170: 210,794 hrs
     MGate EIP3270: 125,234 hrs

Warranty

Warranty Period: 5 years

Disclaimer

Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

I Nostri Marchi

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Patlite
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Advantech
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter

Contattaci via email: clicca qui

Visita anche il nostro portale icpdas.store

© 2020. Lastella Trade

site by www.davidesantandrea.it & Lastella Trade