MGate 5114 MOXA Gateways

Features and Benefits

• Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104
• Supports IEC 60870-5-101 master/slave (balanced/unbalanced)
• Supports IEC 60870-5-104 client/server
• Supports Modbus RTU/ASCII/TCP master/client and slave/server
• Effortless configuration via web-based wizard
• Status monitoring and fault protection for easy maintenance
• Embedded traffic monitoring/diagnostic information for easy troubleshooting
• microSD card for configuration backup/duplication and event logs
• Built-in Ethernet cascading for easy wiring
• Redundant dual DC power inputs and relay output
• -40 to 75°C wide operating temperature models available
• Serial port with 2 kV isolation protection
• Security features based on IEC 62443

Introduction

The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.

Specifications

Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector): 2

       Auto MDI/MDI-X connection
 
Magnetic Isolation Protection: 1.5 kV (built-in)
 
Ethernet Software Features
Industrial Protocols: Modbus TCP Client (Master), Modbus TCP Server (Slave), IEC 60870-5-104 Client (Master), IEC 60870-5-104 Server (Slave)
Configuration Options: Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
Management: ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
MIB: RFC1213, RFC1317
Time Management: NTP Client
 
Serial Interface
Console Port: RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
No. of Ports: 1
Connector: DB9 male
Serial Standards: RS-232/422/485
Baudrate: 50 bps to 921.6 kbps
Data Bits: 7, 8
Parity: Even, Mark, None, Odd, Space
Stop Bits: 1, 2
Flow Control: RTS Toggle (RS-232 only), RTS/CTS
RS-485 Data Direction Control: ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485: 120 ohms
Isolation: 2 kV (built-in)
 
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
 
Serial Software Features
Industrial Protocols: Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, IEC 60870-5-101 Master (Balanced/Unbalanced), IEC 60870-5-101 Slave (Balanced/Unbalanced)
Configuration Options: Serial Console
 
Modbus RTU/ASCII
Mode: Master, Slave
Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Commands: 128
 
Modbus TCP
Mode: Client, Server
Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Client Connections: 32
Max. No. of Server Connections: 32
Max. No. of Commands: 128
 
IEC 60870-5-104
Mode: Client (Master)
     Server (Slave)
 
Max. No. of Client Connections: 32
Max. No. of Server Connections: 32
Max. No. of Information Objects: 2000 points
 
IEC 60870-5-101
Mode: Master (Balanced/Unbalanced)
    Slave (Balanced/Unbalanced)
 
Max. No. of Master Connections: 1
Max. No. of Slave Connections: 1 (Balanced), 31 (Unbalanced)
Max. No. of Information Objects: 2000 points
 
Memory
microSD Slot: Up to 32 GB (SD 2.0 compatible)
 
Power Parameters
Input Voltage: 12 to 48 VDC
Input Current: 455 mA @ 12 VDC
Power Connector: Screw-fastened Euroblock terminal
 
Relays
Contact Current Rating: Resistive load: 2 A @ 30 VDC
 
Physical Characteristics
Housing: Metal
IP Rating: IP30
Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Weight: 507 g (1.12 lb)
 
Environmental Limits
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Operating Temperature: 0 to 60°C (32 to 140°F)
 
Standards and Certifications
Safety: EN 60950-1, UL 508
EMC: EN 55032/24
EMI: CISPR 32, FCC Part 15B Class B
EMS: 
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
 
Hazardous Locations: ATEX, Class I Division 2, IECEx1
Freefall: IEC 60068-2-32
Shock: IEC 60068-2-27
Vibration: IEC 60068-2-6, IEC 60068-2-64
 
MTBF
Time: 1,140,815 hrs
Standards: Telcordia SR332
 
Warranty
Warranty Period: 5 years