ioLogik 2542-GPRS MOXA Smart Remote IO

ioLogik 2542-GPRS MOXA

ioLogik 2542-GPRS MOXA

ioLogik 2542-GPRS

Srmart Remote I/O with 4 AIs, 12 DIOs

Prezzo per pezzo

€ 940,00

(IVA esclusa)

€ 1.146,80 (IVA inclusa)

Articoli Prezzo (IVA esc.)
1+ pz.€ 940,00
3+ pz. € 902,404
5+ pz. € 874,207

Prezzo di 1 pz. iva (22%) inclusa: € 1.146,80

Disponibilità: Non Disponibile

Brand: MOXA

SKU: 96717

Model: ioLogik 2542-GPRS

Bisogno di aiuto?


Features and Benefits

  • Supports cellular (HSPA/GPRS), Ethernet, and serial communication
  • New Click&Go Plus logic provides powerful front-end intelligence
  • 4-port unmanaged switch built in for linking to Ethernet devices
  • Optimized I/O expansion port for daisy chaining up to 8 ioLogik E1200 units
  • 2 serial ports (RS-232/422/485) for connecting field devices
  • Built-in datalogger supports an FTP server and microSD™ card with up to a 32 GB
  • Transforms Modbus RTU into Modbus TCP or Active Tags
  • Active communication with patented MX-AOPC UA Server
  • Smart alarm management: Email, SNMP traps, TCP, UDP
  • Wide operating temperature: -30 to 70°C (-22 to 158°F)


Introduction

The ioLogik 2500 is a smart remote I/O product with unique hardware and software designs, making it an ideal solution for a variety of industrial data acquisition applications.  The ioLogik 2500’s hardware design includes a 4-port unmanaged Ethernet switch and 2 serial ports, enabling the ioLogik 2500 to seamlessly connect to a variety of field devices. One of the Ethernet ports can be used to link to 8 daisy-chained ioLogik E1200 expansion modules to provide more than 100 channels. The ioLogik 2500 acts as the “head” unit, with Click&Go Plus logic used to control the entire I/O array. Most importantly, the ioLogik 2500’s single IP is all that’s required to connect the entire I/O array to your network, providing the perfect solution for industrial field sites that have an insufficient number of IP addresses.

Powerful Control Logic from the New Click&Go Plus™

The new Click&Go Plus™ control logic now supports up to 48 rules with further upgrades to 8 conditions/actions. In addition, its graphical user interface provides 3 logic gates and 3 multi-layers, helping you build more powerful and efficient IO solutions.
Once you finish setting up your Click&Go Plus™ logic rules, IOxpress’s easy-to-use simulation function can be used to find potential errors in your Click&Go Plus™ rules before uploading them to your online devices.  Peer-to-peer (P2P) mode is widely used for industrial applications. Traditionally, you would need to use P2P devices on both sides of the connection. However, if a configuration mismatch occurred between the P2P devices, the P2P connection would fail, after which you would need to spend extra time and effort to check the P2P settings. With IOxpress, all you need to do is set up the output device, and the P2P connection will be established automatically.

 

One IP for Multiple Expansion I/Os Gives You a Smarter Data Acquisition Solution


The ioLogik 2500’s unique IO expansion hardware design lets you link up to 8 ioLogik E1200 modules into a versatile I/O array with 100+ different I/O channels. The ioLogik 2500 acts as the perfect “head” unit, using Click&Go Plus logic to control the entire I/O array, and providing a single IP to connect the entire I/O array to your network.

VPN—Build a Reliable and Secure Cellular Communication Network

For security purposes, the ioLogik 2500-GPRS/HSPA also supports IPSec for building a secure VPN tunnel to the host station. With the help of VPNs, cellular devices acting as a VPN client can initiate a connection with a VPN server. Once the connection is established, cellular devices can communicate with other network devices on the same private network.

Powerful Datalogger and Value-added MODBUS Gateway 


The ioLogik 2500 supports micro SD cards with up to 32 GB of memory, turning the ioLogik into a powerful datalogger for storing valuable data. And with a built-in FTP server, important data from field sites can be accessed remotely by different systems. In addition, the 2 serial communication ports can be used to input data from devices using the Modbus RTU protocol, and then transform the data into Modbus TCP or AOPC tag format before sending it out over the Ethernet network.

New MX-AOPC UA Server Efficiently Reduces System Response Time

The new MX-AOPC UA supports both UA server and DA server types. MX-AOPC UA server has a number of strengths. UA server provides a standard, state of the art security model, assuring your system’s security, and supports communication channels via the standard UA TCP port. This means that messages can be relayed through third party proxies. In addition, configuring the firewall is be easier, since you won’t need to worry about DCOM settings.
In addition, MX-AOPC supports both the traditional Modbus protocol and Moxa’s patented Push type communication. Unlike the traditional passive “pull” method, “active” messages are automatically “pushed” from the ioLogik 2500 to the SCADA system when the I/O state changes or pre-configured events occur. In this way, information can be accurately and efficiently pushed to the SCADA system as it becomes available.

Inputs and Outputs

Digital Inputs 8 channels
Configurable DI/Os 8 channels
Isolation 3k VDC or 2k Vrms


Digital Input

Sensor Type Wet Contact (NPN or PNP) and Dry Contact
Input Leakage Current < 1 mA (@ 30 VDC)
I/O Mode DI or Event Counter
Dry Contact • On: short to GND
• Off: open
Wet Contact (DI to COM) • On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type 8 points per COM
Counter Frequency 2.5 kHz
Digital Filtering Time Interval Software configurable


Digital Output

Type Sink
I/O Mode DO or Pulse Output
Pulse Output Frequency 5 kHz
Over-voltage Protection 45 VDC
Over-current Protection 1.5 A per channel @ 25°C
Over-temperature Shutdown 175°C (min.)
Current Rating 500 mA per channel @ 25°C


Common Specifications


Cellular

ioLogik 2500-HSPA • Five-Band UMTS/HSPA+ (WCDMA/FDD), 800/850/AWS1700/1900/2100 MHz• Quad-band GSM/GPRS/EDGE, 850/900/1800/1900 MHz
ioLogik 2500-GPRS • Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
HSPA data rates • Up to 5.76 Mbps upload speed (max.) • Up to 14.4 Mbps download speed (max.)
EDGE Class 12 data rates • Up to 237 kbps upload speed (max.) • Up to 237 kbps download speed (max.)
GPRS Class 12 data rates • Up to 85.6 kbps upload speed (max.) • Up to 85.6 kbps download speed (max.)
SIM Control Voltage 3.0/1.8 V


LAN

Ethernet • 4 switched 10/100 Mbps RJ45 ports
• 1 optimized port for faster downstream communications with daisy-chained ioLogik E1200 units
Note The optimized daisy-chain port is not supported on wind industry devices (ioLogik E1261W-T, E1261H-T, or E1263H-T).
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP


Serial Communication

Serial Ports 2, RJ45, 3-in-1 interface
Protocols Modbus/RTU (master), serial tunnel mode (client/server)
Serial Line Protection ≥ 8 kV ESD for all signals
Baudrate 1200 to 115200 bps


Serial Communication Parameters

Parity None, Odd, Even
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Flow Control None, RTS/CTS
Baudrate 1200 to 115200 bps
Protocol Modbus/RTU


Power Requirements

Power Input 24 VDC nominal, 9 to 48 VDC
Power Consumption • ioLogik 2512-GPRS: 420 mA @ 24 VDC• ioLogik 2512-HSPA: 460 mA @ 24 VDC
• ioLogik 2542-GPRS: 500 mA @ 24 VDC
• ioLogik 2542-HSPA: 540 mA @ 24 VDC


Physical Characteristics

Wiring I/O cable max. 14 AWG
Mounting DIN rail, wall


Storage

Expansion Slot Up to 32 GB microSD™ memory card (SDHC compatible)
Note For units operating in extreme temperatures, industrial grade, wide-temperature SD cards are required.


Environmental Limits

Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -30 to 70°C (-22 to 158°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude Up to 2000 m
Note Please contact Moxa if you require products guaranteed to function properly at higher altitudes.


Standards and Certifications

Safety UL 508, EN 60950-1, NCC
EMI EN 55022; EN 61000-3-2; EN 61000-3-3;
FCC Part 15, Subpart B, Class A
EMS EN 55024, EN 61000-4-2, EN 61000-4-3,EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
Radio FCC Part 22H, FCC Part 24E,EN 301 489-1, EN 301 489-7, EN 301 511
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Green Product RoHS, CRoHS, WEEE
Note Please check Moxa’s website for the most up-to-date certification status.


Warranty

Warranty Period 5 years

Disclaimer

Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

I Nostri Marchi

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Patlite
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Advantech
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter

Contattaci via email: clicca qui

Visita anche il nostro portale icpdas.store

© 2020. Lastella Trade

site by www.davidesantandrea.it & Lastella Trade